Modern recycling technology for processing films, fibres, and washed post-consumer waste from materials such as PE, PP, PET, PA und PS.
This line is suited to all polyolefins and technical plastics and is ideal for processing hygroscopic, moist, and/or pre-ground materials.

The recoSTAR basic line is equipped with an agglomerator drum tangentially mounted at the extruder. In the agglomerator, the material is collected, cut, dried, and thermically compacted. A knife disk at the bottom of the drum, rotating at high speed, cuts the material.
Heat from the cutting process and friction dry the material and raise the temperature to just under melting point. The rate of material feeding is controlled automatically by the load on the agglomerator motor, and the compacted material is fed continuously to the extruder. The machine is designed so that overloading and underloading are avoided.

The recoSTAR basic series comprises five machine sizes which together cover an output range of 150 – 1200 kg/h. Each machine can be equipped with degassing, high vacuum, backflushing filter and any one of three pelletising systems.