Starlinger - Circular Loom FX 6.0

textile packaging CIRCULAR LOOM FX 6.0 next generation of high-speed circular looms, worldwide proven Starlinger technology, Indicator of Quality (IQ), for lightweight and heavy fabric, warp break detecting system, high economic efficiency

CIRCULAR LOOM FX 6.0 Automatically controlled warp tension: The tension of the warp tapes can be adjusted individually on each side of the loom according to the weight of the fabric to be produced – this reduces fabric width variations to a minimum. Long-wearing ceramic segments guarantee long life, gentle tape handling and minimum intake friction. Automatic loom stop in case of blocked warp tapes helps to avoid tape rupture and adds to increased efficiency. The patented weft stop motion system reduces the take-off speed if a weft tape break is detected. A sensor stops the loom before the weft bobbin runs empty and thus ensures easy bobbin change with the lowest possible waste rate. Warp tape monitoring (patented) and tension control of the individual tapes ensure less machine stops. The innovative FX 6.0 is a 6-shuttle circular loom that targets all aspects of cost-efficient high-tech weaving. It is especially userfriendly and ensures precise and gentle production of high quality fabric even with lightweight tapes. With an IQ of 350 the FX 6.0 sets new standards in its field. Frequency controlled main motor, winder, haul-off and intake motors for optimized production efficiency. Powered by smartTRONIC.

textile packaging Advantages • Indicator of Quality (IQ) of 350 * • Optimised weaving technology • Production speed up to 1200 ppm ** • High efficiency > 90% ** • Fabric width tolerance ± 4mm ** • Wear and tear resistant • Sensor for weft tape end • Warp break detection system • Outstanding fabric quality from 50 to 140 g/m2 • Weft tape width up to 6 mm *** • Oil-free fabric for high coating adhesion and food-safe products *** • Large warp and weft tape packages • Energy-saving AC drives Machines pictured may include equipment sold as options. FX 6.0 Load cell-controlled warp tension system l CE conformity (acc. to EU Directive 765/2008) l Sensor for weft tape end l Warp tape monitoring system (patented) l Warp break detecting system l Grommet band version with 588 positions l Weft break detecting system (patented) l Gussetting unit m Frequency-controlled motors l Unfolding device m Long-wearing ceramic parts l Ultrasonic cutting m Automatic weft cramming (patented) l Hot cutting m Wetting tubs l 2nd surface winder above the 1st m Loom control by smartTRONIC l Bobbin handling system m Ceramic insertion fingers l Grommet band version with 672 positions m l standard m option * running meters on fabric roll divided by number of warp breaks ** based on AD*STAR® quality standard *** depending on tape quality, reed version, fabric width and density

Starlinger Head Office Sonnenuhrgasse 4 1060 Vienna, Austria T: + 43 1 59955-0, F: -25 www.starlinger.com Starlinger & Co Gesellschaft m.b.H. A member of Starlinger Group We reserve the right to technical modifications. DPR-24471-08V Technical Data FX 6.0 Indicator of Quality (IQ) 350 ** Working width, doubleflat 300 - 850 mm No. of tapes * 588 / 672 Shuttles / machine 6 pcs Weft insertion (max.) * 1200 ppm Warp / weft core inside diameter 35 mm Warp / weft core length 218 mm Warp bobbin diameter (max.) 180 mm Weft bobbin diameter (max.) 115 mm Fabric roll diameter (max.) 1200 mm 2954 mm 10750 mm * h = 3100 mm * depending on reed version, weaving construction, fabric width and quality of tapes ** running meters on fabric roll divided by number of warp breaks

RkJQdWJsaXNoZXIy NTM5Mzg=