textile packaging CIRCULAR LOOM RX 6.0 pro world wide proven Starlinger technology, operator-friendly, longer lifetime of parts, outstanding fabric quality, for lightweight and heavy fabric, high economic efficiency
CIRCULAR LOOM RX 6.0 pro Automatically controlled warp tension: The tension of the warp tapes can be adjusted individually on each side of the loom according to the weight of the fabric to be produced – this reduces fabric width variations to a minimum. Long-wearing ceramic segments guarantee long life, gentle tape handling and minimum intake friction. Automatic loom stop in case of blocked warp tapes helps to avoid tape rupture and adds to increased efficiency. Highly efficient frequency controlled main motor, winder, haul-off and intake motors for energyoptimized production. The patented weft stop motion system reduces the take-off speed if a weft tape break is detected. It also stops the loom before the weft bobbin runs empty and thus ensures easy bobbin change with the lowest possible waste rate. Heddle wire version with ceramic eyelets for higher lifetime, easy servicing and low spare part costs. Suited especially for the production of heavy-duty fabric. With the next generation of the RX series, Starlinger puts the focus on longer part lifetime and operator friendliness. Featuring energy-saving AC drives and long-life materials for wear and tear parts, the RX 6.0 pro is easy to operate and ensures efficient production of high quality fabric while saving energy and resources.
textile packaging Advantages • Production speed up to 1140 ppm* • High efficiency > 90% • Wear and tear resistant • Outstanding fabric quality from 50 to 140 g/m2*, 140 to 200 g/m2* with heavy duty version • Weft tape width up to 6 mm • Oil-free fabric for high coating adhesion and food-safe products* • Large warp and weft tape packages • Energy-saving AC drives Machines pictured may include equipment sold as options. RX 6.0 pro Load cell controlled warp tension system l Gussetting unit m Sensor for weft tape end l HDPE kit m Warp break detecting system l Hot cutting m Weft break detecting system (patented) l Ultrasonic cutting m Frequency controlled motors with high energy efficiency l Unfolding device m Increased lifetime of wear and tear parts l 2nd surface winder one above the other m Automatic weft cramming (patented) l 2nd surface winder back to back m Wetting tubs l Bobbin handling system m New electronic system, 7" display l Heddle band version with 720 positions m Ceramic insertion fingers (specs. customer) l Heavy duty version m CE conformity l Warp tape monitoring system (patented) m l standard m option * depending on tape quality, reed version, fabric width and density
Starlinger Head Office Sonnenuhrgasse 4 1060 Vienna, Austria T: + 43 1 59955-0, F: -25 www.starlinger.com Starlinger & Co Gesellschaft m.b.H. A member of Starlinger Group We reserve the right to technical modifications. DPR-24491-04V Technical Data RX 6.0 pro Working width, doubleflat 300 - 850 mm No. of tapes * 576 / 720 Shuttles / machine 6 pcs Weft insertion (max.) * 1140 ppm Warp / weft core inside diameter ** 35 mm Warp / weft core length ** 218 mm Warp bobbin diameter (max.) 180 mm Weft bobbin diameter (max.) 110 mm Fabric roll diameter (max.) 1200 mm 2800 mm 10535 mm* h = 3100 mm * depending on reed version, weaving construction, fabric width and quality of tapes ** special versions on requestwww.starlinger.com