Starlinger - Circular Loom RX 8.1

textile packaging CIRCULAR LOOM RX 8.1 state-of-the-art 8-shuttle circular loom, for lightweight fabric, oil-free reed and shuttle design, worldwide proven Starlinger technology, high economic efficiency, swift ROI

CIRCULAR LOOM RX 8.1 Automatically controlled warp tension: The tension of the warp tapes can be adjusted individually on each side of the loom according to the weight of the fabric to be produced – this reduces fabric width variations to a minimum. Long-wearing ceramic segments guarantee long life, gentle tape handling and minimum intake friction. Automatic loom stop in case of blocked warp tapes helps to avoid tape rupture and adds to increased efficiency. Frequency-controlled main motor, haul-off and intake motors for optimized production efficiency. The patented weft stop motion system reduces the take-off speed if a weft tape break is detected. It also stops the loom before the weft bobbin runs empty and thus ensures easy bobbin change at the lowest possible waste rate. Heddle wire version with ceramic eyelets for increased lifetime, easy servicing and low spare part costs. Suited especially for the production of heavy-duty fabric. With the introduction of the RX 8.1 circular loom, the highly successful RX series now covers the entire production range in terms of fabric width. This model produces endless tubular or flat fabric from PP, HDPE and PET tapes for 1-loop big bags (FIBCs), tarpaulins, geotextiles and agrotextiles. The specially constructed reed does not require lubrication, allowing the production of fabrics for food packaging.

textile packaging Advantages • Production speed up to 800 ppm* • High efficiency > 70% • Increased lifetime of machine parts • Outstanding fabric quality from 50 to 140 g/m2; 140 to 200 g/m²** with heavy-duty version • Weft tape width up to 6 mm • Oil-free reed and shuttle design • Large warp and weft tape packages • Energy-saving components • Reduced noise level Machines pictured may include equipment sold as options. RX 8.1 Load cell controlled warp tension system l Surface winder with balancer for constant winding tension m Sensor for weft tape end l Double warp infeed system m Warp break detecting system l Insertion fingers for heavy-duty weaving m Weft break detecting system (patented) l Creel monitoring system m Frequency-controlled motors l Gussetting unit m Long-wearing ceramic parts l HDPE kit m Automatic weft cramming (patented) l Unfolding device m Wetting tubs l UltraSonic cutting m smartTRONIC l Heat cutting m Double compensation l 2nd surface winder back to back m Ceramic insertion fingers l Bobbin handling system m Surface winder l Heavy-duty version m l standard m option * depending on tape quality, fabric width and density ** special versions on request

Starlinger Head Office Sonnenuhrgasse 4 1060 Vienna, Austria T: + 43 1 59955-0, F: -25 www.starlinger.com Starlinger & Co Gesellschaft m.b.H. A member of Starlinger Group We reserve the right to technical modifications. DPR-24481-08V Technical Data RX 8.1 Working width, doubleflat 1200 - 1700 mm Working width, doubleflat, at reduced pick rate* 1200 - 1300 / 1600 - 1700 mm No. of tapes, with single / double inlet 1300 / 1600 Shuttles / machine 8 pcs Weft insertion (max.)* 800 ppm Warp / weft core inside diameter** 35 mm Warp / weft core length** 218 mm Warp bobbin diameter (max.) 180 mm Weft bobbin diameter (max.) 115 mm Fabric roll diameter (max.) 1200 mm * depending on weaving construction, fabric width and quality of tapes ** special versions on request 3850 mm 14100 / 16000 mm* h = 4300 mm

RkJQdWJsaXNoZXIy NTM5Mzg=