textile packaging CIRCULAR LOOM RX 8.2 next generation of heavy duty weaving, high speed, worldwide proven Starlinger technology, outstanding fabric quality, high economic efficiency, swift ROI
CIRCULAR LOOM RX 8.2 Automatically controlled warp tension: The tension of the warp tapes can be adjusted individually on each side of the loom according to the weight of the fabric to be produced – this reduces fabric width variations to a minimum. Long-wearing ceramic segments guarantee long life, gentle tape handling and minimum intake friction. Automatic loom stop in case of blocked warp tapes helps to avoid tape rupture and adds to increased efficiency. Frequency-controlled main motor, haul-off and intake motors for optimized production efficiency. The patented weft stop motion system reduces the take-off speed if a weft tape break is detected. It also stops the loom before the weft bobbin runs empty and thus ensures easy bobbin change at the lowest possible waste rate. Heddle wire version with ceramic eyelets for increased lifetime, easy servicing and low spare part costs. Suited especially for the production of heavy-duty fabric. It’s simple maths: The product of the most successful heavy-duty circular loom on the market multiplied by the latest technology equals the RX 8.2. The upgraded 8-shuttle loom produces endless tubular or flat fabric for heavy-duty applications such as big bags (FIBCs), tarpaulins, geotextiles and agrotextiles from PP, HDPE and PET tapes and achieves an IQ (Indicator of Quality) unmatched by comparable looms.
textile packaging Advantages • Production speed up to 800 ppm* • High efficiency > 70% • Increased lifetime of machine parts • Outstanding fabric quality from 50 to 220 g/m2 (260 g/m2)* • Weft tape width up to 6 mm • Oil-free reed and shuttle design • Large warp and weft tape packages • Energy-saving components / 7.5 kW* • Reduced noise level Machines pictured may include equipment sold as options. RX 8.2 Load cell controlled warp tension system l Insertion fingers for heavy-duty weaving l Double warp infeed system l Double compensation l Double intake rolls l Surface winder with balancer for constant winding tension l Sensor for weft tape end l Creel monitoring system m Warp break detecting system l Gussetting unit m Weft break detecting system (patented) l HDPE kit m Frequency controlled motors l Unfolding device m Long-wearing ceramic parts l UltraSonic cutting m Automatic weft cramming (patented) l Heat cutting m Wetting tubs l 2nd surface winder m smartTRONIC l Bobbin handling system m l standard m option * depending on tape quality, fabric width and density
Starlinger Head Office Sonnenuhrgasse 4 1060 Vienna, Austria T: + 43 1 59955-0, F: -25 www.starlinger.com Starlinger & Co Gesellschaft m.b.H. A member of Starlinger Group We reserve the right to technical modifications. DPR-25111-08V Technical Data RX 8.2 Working width, doubleflat 1700 - 2250 mm Working width, doubleflat, at reduced pick rate* 2100 - 2250 mm No. of tapes 2400 Shuttles / machine 8 pcs Weft insertion (max.)* 800 ppm Warp / weft core inside diameter** 35 mm Warp / weft core length** 218 mm Warp bobbin diameter (max.) 180 mm Weft bobbin diameter (max.) 115 mm Fabric roll diameter (max.) 1200 mm 4000 mm 19850 mm* h = 4500 mm * depending on weaving construction, fabric width and quality of tapes ** special versions on request
www.starlinger.comRkJQdWJsaXNoZXIy NTM5Mzg=